Wednesday 29 October 2014

Pots from Old Jeans by Wendy

I'm very proud to say that I am Joe's mum and fortunate that Jenny is now part of our family. Joe's old bedroom is now a guest room ( with a fold down bed made by his dad ) and my workroom were I can surround myself with fabrics and be inspired.

This week I have made a couple of fabric storage pots from the legs of old jeans. One pair were black the other standard blue ( slightly harder to sew as they are stretch ones). I tried to find some with the least flare from my box of discarded jeans. 


I used an 8 inch section from a leg plus a circle. If you can't cope with working out how big to cut the circle, by measuring across the leg x 2 to get circumference and doing the maths, try putting "circle calculator" into Google and it will work out the maths for you. Do remember to measure the denim tube along the seam allowance not the bottom raw edge and add the same seam allowance to the circle either on the pattern or as you cut it.

      

For the lining I used some cotton fat quarters from my fabric stash and some extra firm heat and bond interfacing. I would normally iron the interfacing to the outside fabric but I did not want to unpick the side seams so fused it to the main body of the lining on the sides but to the denim on the base.



Folding the lining fabric and placing the leg section on top, so one side of leg is along the fold, I cut out the lining the same size at the top and bottom but leaving a seam allowance down the side which I marked with a prym trickmarker. This seam was then pinned and stitched.

This tube was attached to the denim tube ( wrong sides together ) at one end. Pulled right side out and pressed, then top stitched on the denim through the layers of the seam.



The base circle of denim and a matching circle cut out of the lining were pinned then machine tacked together. I marked both the circle and the denim end of the tube in 4 equal places along the sewing lines ( not the edges) to help join them together. I pinned then machined along the stitching line twice to make it strong. You may need to tack it first to ensure you don't get pleats or puckers.


      


     

Clip the curves then fold the lining down the sides and ladder stitch into place by hand.



Turn right side out and fold down the cuff.